SAI™

Internal Balanced Mechanical Seal

  • Non-Shaft fretting design to reduce cost in pump and equipment overhaul
  • Provides maximum seal life in clogging and congealing liquids such as slurries given the smooth non-clogging profile (springs out of the product)
  • Hydraulically balanced seal face
  • Premium drive integrity (milled metallic lug drive)
  • Sizes available from 0.750” to 6.000” (18mm to 155mm)

SAI Mechanical Seal


MO Series

Internal Monolithic Face Mechanical Seal

  • Available with a hydraulically balanced or unbalanced seal face
  • Non-clipped, multiple spring design
  • Enhanced flush with non-clogging spring design
  • PTFE wedge or elastomer shaft seal options
  • Available in 12 generic forms, covering shaft sizes 0.750” to 4.000” (20mm - 100mm)

MO Series Mechanical Seals


Bo2™

Internal Bellows Mounted Mechanical Seal

  • Bellows with NO bonded joints, available in Viton®, Nitrile or EPR
  • Single coil spring design with bi-directional shaft rotation feature
  • Available in 3 generic forms, covering shaft sizes (10mm - 100mm)

BO2 Component Seal


P0 Series

Internal Single Coil Spring Mechanical Seal

  • One of the most commonly utilized component seal designs globally
  • Single coil spring design with bi-directional shaft rotation feature
  • Positive face drive mechanism
  • Available in 9 generic forms, covering shaft sizes 0.375" to 3.000" (10mm - 75mm)

P0 Series Internal Single Coil Spring Mechanical Seal


CS™ / CSC™ Range

External Seal with Non-Metallic Parts

  • External component seal with hydraulically balanced seal face
  • Non-metallic wetted parts for use on chemical applications
  • Supplied clipped and pre-set to working length
  • Available with collet drive for use with hardened or non-metallic sleeves
  • Sizes available from 0.625" to 4.000" (20mm - 100mm)

CS-CSC Range External Component Seal