Skip to main content

Prepared for Rivian, Plymouth, MI

50 HP Outdoor Packaged Air Systems for EV and Automotive Plants

A Brabazon AirPack puts the compressor, dryer, filtration, and controls in one weather-tight enclosure that arrives pre-piped and pre-wired. Your crew makes one set of air, drain, and power connections. There is no compressor room to build out.

What is in the package

Four systems, one enclosure, one set of connections.

Every component is selected after we review your demand. We do not quote a model number until we know what your plant needs.

  • 01 COMPRESSOR

    Sullair rotary screw

    Variable speed or fixed speed, chosen after a demand review.

  • 02 DRYER

    Refrigerated or desiccant

    Sized to the pressure dew point your process and climate require.

  • 03 FILTRATION

    Low pressure drop

    Filtration matched to your required ISO 8573 air quality class.

  • 04 ENCLOSURE

    Built to be moved and set

    Lifting lugs, forklift slots, and 460V single-point power.

Model, CFM, and dimensions are confirmed in your ROM once demand is reviewed. See our industrial outdoor package installations.

Michigan winters, 24/7 production

Specified for January and July.

  • Enclosure heatersKeep components above their minimum operating temperature.
  • Cold-weather packageProtects the compressor and controls during extended cold.
  • Heat-traced drainsKeep condensate moving instead of freezing in the line.
  • Summer cooling and intake sizingVentilation sized so the package runs through hot days.
  • Remote monitoring (option)See status and alarms without walking out to the pad.
  • N+1 redundancy (option)Extra compressor capacity keeps the required air supply available while one unit is out of service.

The honest tradeoff

Outdoor packages are not always the cheaper answer.

What it saves

  • Floor space inside the plant
  • Compressor room construction

What it still requires

  • A concrete pad
  • A short, heated run into the building
  • Winterization

When indoor may cost less

If you already have a conditioned compressor room with spare capacity, an indoor unit can cost less overall. We will tell you which way your site points.

Compare indoor rotary screw compressors

ROM checklist

Six things that make a ROM accurate.

  1. Demand in CFM and required pressure
  2. Required dew point and air quality class
  3. Site photos and a layout showing the pad location
  4. Distance from the pad to the point of use
  5. Available voltage and amperage
  6. Installation scope: set and pipe, or turnkey

Lead time is quoted with your ROM. It depends on the compressor, dryer, and enclosure selected. Not sure of a figure? Send what you have and we will help fill the gaps.

Your Brabazon team

Two people who will answer for this project.

  • Main line 800.825.3222
  • Family-owned since 1978
  • Certified technicians
  • Service for all makes and models

More on our work with automotive plants.

Request ROM pricing and lead time

Your request goes to the Central Illinois territory team for Sally Struckman to review. Urgent? Call 800.825.3222, answered 24/7.

Outdoor packaged air questions

Can a packaged system sit outdoors through a Michigan winter?

Yes, when it is built for it. The enclosure needs heaters, a cold-weather package, and heat-traced condensate drains, and the run from the package into the building should be short and protected from freezing. We specify those items for your site before we quote.

Do I need a dryer if the package is outdoors?

Yes. Outdoor air still carries moisture, and in cold weather any water left in the line can freeze in piping that leaves the enclosure. A refrigerated or desiccant dryer is selected to the pressure dew point your process and the coldest exposed pipe require.

What is the difference between variable speed and fixed speed at 50 HP?

A variable speed compressor adjusts motor speed to match changing demand, while a fixed speed compressor runs at full output and loads and unloads. Variable speed usually saves energy when demand swings; fixed speed often costs less to buy and suits a steady base load. We recommend one after reviewing your demand.

What does turnkey installation include?

Turnkey means we handle the installation scope from setting the package to startup, typically rigging and setting, piping to your point of use, and coordinating the electrical connection, then commissioning. The exact scope is written into the ROM so you can compare it with a set and pipe only option.

Can you service equipment you did not sell?

Yes. Our certified technicians service all makes and models of compressors, dryers, and filtration, including equipment purchased elsewhere.

Authorized distributor for

Sullair, Atlas Copco, Becker Pumps, Grundfos, Paco, Peerless Pump, Pure Aire, Beko, Mikropor, Hankison, Zeks.

Sullair authorized dealer since 1984. Becker Pumps authorized distributor and repair center.

We service all makes and models, including

Ingersoll Rand, Gardner Denver, Quincy, Kaeser, Kaishan, FS-Elliott, Powerex, Dekker, Mattei, Curtis, Champion, Elgi, Chicago Pneumatic, Hitachi.

Service and repair capability does not imply an authorized distributor relationship with these brands.

Request an equipment or service recommendation